Listing Description:
FERRARI 710A3 SPECIFICATIONS:
Lifting capacity of 7935 lbs @ 8’8” Lifting capacity of 4960 lbs @ 13’8”
Lifting capacity of 3415 lbs @19’5” Lifting capacity of 2535 lbs @ 25’4”
Lifting capacity of 1930 lbs @ 31’2”
Three (3) hydraulic extensions to 31’2”
Dual operator controls at ground level
North American JIC hoses and fittings
400 degree non-continuous rotation
15’ outrigger spread, manual pull out beams on roller bearings
All cylinders equipped with load holding valves
Close coupled power take off (PTO)
High pressure filter in addition to return filter
70 L hydraulic tank with sight gauge and thermometer
KENWORTH T170 CHASSIS SPECIFICATIONS:
PACCAR PX-6; 260 HP @ 2400 RPM; 620 ft/lbs @ 1600 RPM
ALLISON 1000RDS 5 speed Automatic Transmission
9 7/8” x ¼” thick steel frame rails
Hydraulic ABS Brakes
8,000 lbs DANA SPICER D800F single steer axle
11,500 lbs DANA SPICER S14-130 single rear axle; REYCO suspension; 4.10 axle ratio
BRIDGESTONE R250F 245/70R19.5 14ply front tires
BRIDGESTONE M724F 245/70R19.5 14ply rear tires
Dual 35 US gallon fuel tanks
Air conditioning; AM/FM/CD/WB radio
206” wheelbase; 96” wide track
NWC CUSTOM RIG UP:
168”L x 96”W steel frame, wood top deck with full length rub rails, 60”H x 96”W headache rack behind cab has two chain hangers and three sling hooks and full chain tray complete with turn signal and clearance lights; 30”H x 90”W headache rack behind crane with grab handles, two access ladders at front of deck, rear underride protection with Class II receiver hitch, 7-prong trailer plug; (2) tire chain hangars; Mudflaps front and rear of tires with anti-sail brackets; CMVSS lighting
